Menu

Technologie    <<

FIPS

In 1986 was FOMAT de 1e die begreep dat toenemende snelheden van machines, een synchronisatie vereisen, tussen het aanvoer transportsysteem en de machinesnelheid, om mogelijke vervuiling en een verkorte levensduur het vilt te voorkomen. Vandaag de dag hebben de laatste generatie van FIPS (smart serie) door het ontbreken van eindschakelaars, gezorgd een verdere verlaging van de onderhoudskosten.

Lees verder

FAP 125

FAP 125 is een apparaat om de borstel automatisch te draaien en de sproeipijp te spoelen.

Lees verder

ALL SHOWER PIPES (HP)

All shower pipes zijn voorzien van Fomat ruby nozzles, die ontworpen zijn om te zorgen voor een waterstroom en verbruiksconstante gedurende de tijd. Elke pijp is ontworpen om turbulenties en afbuiging in het midden te vermijden. All shower pipes zijn uitgerust met een penseelreinigingssysteem, die is ontworpen om turbulente effecten te vermijden en om de perfecte reiniging van de mondstukken en binnenwanden van de pijp te waarborgen.

Lees verder

SMART JET

Is het laatste systeem wat betreft het reinigen van vilt. Het biedt de mogelijkheid om het waterverbruik verder te verminderen, waardoor het direct in het vieze gebied kan ingrijpen dankzij een speciale draaiende kop met 4 mondstukken met grotere reinigingswerking.

Lees verder

EDGE TRIM SHOWER

System designed to allow a safe and easy replacement of the nozzles. The change of paper size can be done either manually with graduated bar or automatically by means of DCS.

Lees verder

TAILCUTTER

Made of a rigid structure with reliable components, this system avoids vibrations that can lead to inaccurate cutting causing frequent breaks of the paper sheet. The cutting speed is synchronized with the machine speed, this avoids the formation of conical reels. Maintenance can be done while the machine is working.

Lees verder

VAF - VACUUM CONTROL VALVE

Fomat control valve was designed to maintain a constant level of vacuum in the suction boxes. When a high vacuum is requested, the valve ensures a stable and proportional control, while with low vacuum, unlike other valves, it closes completely and put in communication the suction boxes with the atmospheric pressure, eliminating any internal residual pressure.  The VAF valve is equipped with Fomat positioner for compressed air saving, inside which it is possible to install the vacuum transmitter to read and regulate the valve. This valve was designed to significantly reduce costs and time for maintenance. It can be provided with a dedicated control system or in remote connection with existing systems

Lees verder

SMART CLEANER

Fomat system was designed to distribute uniformly the chemicals on cylinders and wires of dry end by means of an atomizing nozzle, reducing the consumption of these products. The HMI  (remote touch panel) for Smart Cleaner gives the possibility to determine the movement speed according to the machine speed. The control unit can be linked to all types of DCS or interface directly with Fomat dosing system.

Lees verder

HYDRO- ELECTRIC OSCILLATOR FOR DRY END CLEANING BLADES

After the great success of the oscillators for creping doctor blades, Fomat developed oscillators for the cleaning doctor blades of the drying section. The system ensures high reliability, significantly reducing installation and maintenance costs and  eliminating dead time for reversal.

 

Lees verder

DRY END TAIL CUTTER

The system has a simple and robust structure with components suitable to work at high temperatures. Its compact design allows installation in tight spaces. The cutting speed is synchronized with the machine speed. The system is controlled by a dedicated PLC which can be interfaced with the dry end tail braker. The motor is equipped with encoder that allows to detect the right position of the cutter reducing maintenance problems. Maintenance operations can be done out of the paper size for the operator total safety.

 

Lees verder

DUOFLOW ROTARY JOINTS FOR COOLING

Basing on the plant engineering experience, Fomat designed a joint with cooling siphon for  calenders and cylinders suitable for paper industry application and studied to have low maintenance costs. Rotary joints are made by a cooling water inlet, a compressed air inlet to ensure the pressure difference and a water outlet. The joint cartridge is interchangeable with the steam cartridge. The water is injected in the cylinder by means of fan nozzles mounted on the fixed siphon, which ensure the uniformity of the cooling fluid.

 

Lees verder

DRY END TAIL BRAKER

The system consists of a toothed blade and adjustable air jets for the passage of the tail. During the paper passage, the toothed blade makes the cut and simultaneously the air jets ensure the passage of the tail to the pope, preventing that the same goes under the machine. The system is controlled with pushbutton or interfaced with the PLC of the dry end tail cutter. Safety interlocks are provided to prevent access to the cutting blades during operation.

Lees verder

DUOFLOW ROTARY JOINTS AND TURBULENCE BARS

In order to get a perfect drainage of the cylinder, Fomat recommends to install fixed siphons with rotary joints supported by the machine frame. In case that a fixed anchoring structure on the machine is not available, Fomat designed a self-supporting holder able to ensure the stability of the siphon itself.  Both these solutions provide high stability of the siphon, which is the base condition to maximize the steam system efficiency

Lees verder

COOLING AND HEATING SYSTEM FOR CYLINDERS AND CALENDERS

Fomat manufactures customized cooling/heating equipment considering the energy source more convenient for the customer case by case.

Lees verder

MONOFLOW AND DUOFLOW ROTARY JOINTS FOR YANKEE

After over 30 years of experience in steam systems, Fomat designed a steam joint to ensure high reliability and easy and safe maintenance operations. For this purpose we have designed in the nineties a series of joints equipped with a cartridge seal unit that can be replaced very easily in a few minutes and then reconditioned for maintenance in total safety.

 

Lees verder

DOCTOR BLADE OSCILLATOR

Fomat became aware in 1998 that the life of the Yankee cylinders was decreasing due to the increased speed  and coating. A non-synchronized  mechanical movement was no longer adequate. The solution was a hydro-electronic product with variable stroke and speed, without dead times in the inversion phase and with the possibility to set the inversion point, thus ensuring longer life time of the blades and a decrease in paper breaks.

 

Lees verder

COATING PLANT AND SPRAYING SHOWER

FOMAT coating plant allows the complete independence from the suppliers of chemicals. It ensures the proper mixing, heating and concentration as well as filtration of the product. Another feature of the system is our FAST REMOVING coating pipe  with fan nozzles easy to be replaced in a few seconds while the machine is running. The shower is designed to ensure the uniform distribution of chemicals on the outer surface of the Yankee with a double, triple and quadruple coverage.  The shower can be equipped with pneumatic or electronic oscillating system.

Lees verder

FAFF FRESH WATER FILTER & OTOCINCLUS CLARIFIED WATER FILTER

The need to use fresh water with residues or to reduce the water consumption brought Fomat to design and produce FAFF system for fresh water and patented OTOCINCLUS system for clarified water.

 

 

Lees verder

ALL SHOWER PIPES

Special applications

Fomat provides the best solution for each kind of application in order to meet the customer needs. The picture shows an application on a machine with width 12m where a system to eliminate the pipe deflection was installed

 

Lees verder

FAST REMOVING Special applications

In case of large showers where the extraction of the inner pipe is difficult because of dimension and weight, an extraction system with a suitable support guide is available, which allows the operator to perform these operations independently and safely.

Lees verder

Cooling joint

The cooling on certain press rolls and reel drum is important to enhance the equipment performance.

It is vital to obtain the correct extraction of the cooling water to avoid a higher load on the roll, specially at high machine speed.

FOMAT manufactures a joint and a siphon capable to be installed in every roll, thanks to the great experience we have acquired with our steam joints.

Lees verder

Duoflow rotary joint

Rotary joints are vital for the proper operation of a steam plant: here the condensate extraction starts.

FOMAT joints (supported and self-supported duoflow) have the peculiarity to keep the syphon in cantilever: this way the distance between the syphon and the cover of the cylinder remains constant.

Another feature of our joints lies in the seal cartridge: the graphite stays inside this cartridge and that allows for a safe and fast replacement.

Lees verder

FAST REMOVING

Is a patented system which allows to disassemble the shower while the machine is working.

The fixing and sealing systems besides the discharge system, ensure reduced assembling/disassembling time with no need to stop the machine.

 


Lees verder

SCAN TURBO EF5

Lees verder

Steam plant for tissue machine

We offer a closed steam and condensate system without any flash steam. We supply an optimal system combined with our rotary joints and siphons

Lees verder

TAIL CUTTER CONTROL

  • Pre-getest systeem.
  • Sluit gewoon de voeding en start de unit op.
  • Staartfrees kan worden bediend met een extern signaal (fotocel met breekbeurten of alarmknoppen).
Lees verder